Curving connector for brass shower faucet

Hexagon screw cap for brass shower faucet

Bolts and nuts (commonly known as screw caps) are mechanical parts connected by a spiral line between them.Those who have studied mechanical principles generally know that through a screw, the screw movement of the nut becomes a linear movement along the axis of the bolt. The fastening and dismantling of the coupling parts are achieved by tightening and loosening the screws.

Curving Connector Principle：
The reason why objects do not fall off when placed on a slope is mainly related to their material (that is, friction) and the angle of the slope.There is a friction angle between the object and the inclined surface. As long as the angle of the inclined surface is smaller than the friction angle between the object and the inclined surface, the object will not slip off the inclined surface. This is the principle that the nut will not automatically loosen after being tightened.Brass Fitting For The Faucet is because the spiral is similar to the inclined plane that it is very labor-saving. A very large force can be obtained in the axial direction of the bolt by using a small screw in the spiral direction, which is the reason why the workpiece can be connected very tightly.

Brass Fittings for Faucet

Looking for a custom metal stamping manufacturer or metal stamper in China? Need metal stamping tools & dies designed and manufactured in China? Custom metal stamping production services needed? No problem, contact us now and find out how we can help you. We accept small orders and can handle high-volume orders up to millions of parts.

All the Brass faucet fitting can be Customized

Forging is pressed and formed by the pneumatic mallet or other equipment. Forging can keep the continuity of the metallic structure and consistency of outline.

Here is our forging technological process

THE FIRST STEP, get the drawing or sample from our client.

THE SECOND STEP, our technical department would make the assessment for the material, mould, price and other technology.

THE THIRD STEP, after the confirmation form the client, we will prepare the mould and cut material piece by piece as the drawing.

THE FORTH STEP, putting the cutted material into the fire, till they had been red-hot. Then putting the red-hot material into the mould inside the forging machines. Last, the pneumatic mallet will press the material as the mould.

THE FIFTH STEP, putting the product into the Deflashing equipment for Deflashing.

THE SIXTH STEP, Putting the product after Forging and Deflashing into the Sandblasting Machine for increasing the thickness and roughness of the finished product.

.